Fully-equipped repair shop on
wheels.
Sometimes even the fastest
off-site service isn’t good enough … the work must be performed at the site
and within a very tight window of opportunity. And that’s where our Field
Service Unit delivers.
The self-contained repair shop
and mobile testing stand unit offers on-site repair and resetting of safety
valves during scheduled maintenance shutdowns.
Step into the mobile repair unit
and you’ll find all the equipment necessary to perform the highest-caliber
repairs. Included is a sand blaster, compressor, lathe, mill/drill press,
lapping stones—it’s all inside. There’s also a Consolidated®
seat-resurfacing machine with all the adapters for every orifice in the
Maxi-Flow® boiler line. Completed safety valve work will carry the
VR stamp.
State-of-the-art computerized
testing.
The Field Service Unit also
includes a state-of-the-art computerized lift-assist testing unit that allows
for testing set pressures and resetting high-pressure safety valves in the
field. The testing unit makes testing valves that are welded in-line or
stationary possible without removing the valves. You won’t be required to
pressure down or increase pressure to test for set pressure. The lift-assist
testing unit also allows for resetting valves after repairs have been made while
the valves are on-line.
If removing from service and
shipping valves isn’t practical or possible at your customer's plant, then the
on-site Field Service Unit is the perfect answer. From the equipment on the
truck to the people on the repair team, NASVI backs everything. Whether the
customer needs the Field Service Unit for three days or three weeks, you’re
going to save them a lot of downtime and increase your opportunities for more
valve sales.
